Silicone Polymer Deadend Insulator
- Weathersheds:
- These Insulators are manufactured with silicone rubber with proprietary compound, the same proven material used in transmission insulators.
Insulators are available with other ANSI and IEC end fittings. Please refer to the catalog for the configurable options available.
One example of many models
General
| Application | Deadend |
| Cantilever Bending Strength – Routine | 7500 |
| Fitting – Ground/Base | Clevis |
| Fitting – Live Line End | Tongue |
| Insulator Type | DS46 |
| Material | Silicone Polymer |
| Material – End Fitting | Steel |
| Material – Pin (Cotter) | Stainless Steel |
| Number of Sheds | 10 |
| Shed Style | Uniform |
| Strength Rating – Ultimate | 15000 lb |
| Tensile Strength | 15 K |
| Tensile Strength – Routine | 7500 |
Dimensions
| Diameter – Shed(s) | 4.4 |
| Diameter – Small Shed | 2.95 |
| Length – Effective | 23.0 in |
| Rod Diameter | 0.626 |
| Thickness – Housing | 0.148 |
| Weight | 3.3 lb |
Electrical Ratings
| Arc Distance – Dry | 21 |
| Creep and Leakage Distance | 37.6 IN (955mm) |
| Critical Impulse Flashover (CIFO) – Negative | 365 |
| Critical Impulse Flashover (CIFO) – Positive | 360 |
| Flashover Voltage – 60 Hz Dry | 195 |
| Flashover Voltage – 60 Hz Wet | 175 |
| Voltage – Line | 35000 V |
| Withstand Voltage – 60 Hz Dry | 180 |
| Withstand Voltage – 60 Hz Wet | 155 |
Certifications and Compliance
| Industry Standard(s) | ANSI |
Logistics
| Pallet Quantity | 300 EA |
Deadend Insulator, also called Cross Arm Insulator or Suspension Insulator, Composite Line Insulator, is made of high quality stainless steel fittings at both ends with bolts and pull rings. It is mainly used for projects of air transmission distribution lines. You can effectively use the narrow hall switch to transmit electricity. It is suitable for the technical transformation of the urban network, which can reduce the height of the tower and save a large amount of manpower, financial resources and material resources.